Converter TP-LINK MM wavelength 850nm, range to 500m, transmission speed of 1Gbps

The 10mW visual fault locator features a rugged design, a universal connector and an accurate measurement.

Tool for cleaning fiber optic connectors and adapters with diameter of 2,5mm (MU, LC)

The 45-164 is a blue Coaxial Cable Stripper for wire 45-164.

The drawer of cable reserve 19 "1U Q-Fiber, consists of a box and a front panel with an oval hole ..

Wall Box PSN2 to complete the installation of fiber optic to install the adapter 6xSC DX or 6xLC Quad

DOME fiber optic closure 72 Splice is suitable for protecting fiber cable splices in branching applications.

The fully loaded patch panel suitable for 19" racks.

INNO's splice-on connector is designed to save time and increase productivity without sacrificing quality.

Two CBF SFP (1.25G) 1310/1550nm module kit, 20Km, single mode LC connector

The set of two CBF SFP WDM 3km LC simplex (DDMI)

Splitter PLC 1x16 SC/APC BlackBox splits the optical signal power evenly into all the output ports.

CBF converter WDM works on the waves TX:1550 RX:1310 with speed 10/100Mbps

The dispenser is designed to dispense a portion of the alcohol during the cleaning of optical fibers.

Designed to remove contaminants from the fiber optic connector before gluing or splicing.

The sliding telescopic fully loaded patch panel suitable for 19" racks.

The fully loaded patch panel suitable for 19" racks.

KIMTECH SCIENCE Kimwipes Delicate Task Wipers 280 pcs. Sterile pre-saturated cleanroom wipers to the wiper

The sliding telescopic fully loaded patch panel suitable for 19"

Splitter PLC 1:32 SC/APC 1m 0.9mm splits the optical signal power evenly into all the output ports.

Fibre Optic Cables 9/125 4J 1,0kN PE (WITH KRP) single loose tube external duct cables with KRP and polyethylene (PE) jacket. Reel 2000 meters.

CBF Fiber Optic Adapter SC MM Duplex

Optical Dropwire Anchoring Clamp for Flat FTTH aerial Cable

Converter 10/100/1000 Mbps Auto-Negotiation for copper port. Single-mode SM 1310nm.

Microduct cable MK-LX6 12J 9/125 G.652D for Blowing & pulling installation method

Professional tool kit is ideal for optical fiber fusion splicing - extended version

External aerial fiber optic cable 12J 2Tx6F ITU -T G.652D ADSS 4kN for spans up to 120mb

CBF SFP+ 10G 0,5m Passive Copper Direct Attach Cable

Wall Box PSN 16xSC simplex, key lock dedicate to build FTTH network. Cabinet ready to install the adapter 16xSC SX or 16xLC DX

Wall Box PSN1 to complete the installation of fiber optic to install the adapter 4xSC DX or 4xLC Quad

A precise, core-alignment fusion splicer FSP-UP60, delivering the automated functionality and accuracy along with the portability and speed needed for field installations such as FTTX and LAN