Electrodes for fusion splicer series INNO INSTRUMENTS.

CBF Pigtail single-mode with connectors ST/PC 2m length

Splitter PLC 1:4 without connector 1m 0.9mm splits the optical signal power evenly into all the output ports...

The set designed for transmission on single fiber.

The sliding telescopic fully loaded patch panel suitable for 19" racks.

Microduct cable MK-LX6 24J 9/125 G.652D for Blowing & pulling installation method

CBF Transceiver Module SFP+ 10Gb WDM Tx: 1270nm/Rx: 1330nm 20km DDM

Fibre Optic Cables Buried Direct Access Cable (B-DAC) 8J 9/125 G652D HDPE

CBF Fiber Optic Adapter LC/APC duplex

FTTH Drop Fiber Optic Cable 2J G657A2 NOTKSp 1000-2000m on drum

CBF Patch cord single-mode (SM 9/125) simplex with connectors SC/APC-LC/PC 1m length.

Patchcord single-mode (SM 9/125) duplex with connectors SC/PC-SC/APC 2m length.

The fully loaded patch panel suitable for 19" racks.

Flat aerial fiber optic cable 24J ITU-T G.652D DROP in central tube and two support rods. Spans up to 50mb.

The sliding telescopic fully loaded patch panel suitable for 19" racks.

Clamping Sleeve KLD-T (100 pcs.)

MultiPatchcord 2x4xLC/PC SM PE 1,5kN 65m

Active clad-alignment splicer with the world’s highest fiber image magnification rate.

Optical Transceiver SFP GPON 2.5/1.25Gb 1490/1310nm SM Class B+ DDM.

Cabinet FTTH 144J 52/52/16 AMP for wall mounting.

CBF Pigtail multi-mode OM3 with connector LC 2m length.

The rugged, compact Laser light source

Fiber Optic Converter multi-mode MM 2km with Sc connector

CBF Transceiver Module SFP WDM 1,25Gb SM Tx=1550nm 20km LC simplex DDM.