CBF Fiber Optic Adapter LC/APC duplex

An inexpensive, lightweight stripper.

CBF 19 inch rack ODF with sliding front panel 1U 12x SC simplex black

1GE ONT SC/UPC is a high-end home gateway in FTTH solution EPON.

Patchcord single-mode (SM 9/125) simplexwith connectors SC/APC-SC/APC 2m length.

Fibre Optic Cables BDC-MSA 1,55kN PE 12J 9/125 G.652D 1Tx12 is the multi loose tube cable

CBF Pigtail multi-mode OM2 with connectors LC/PC 2m length.

Splitter PLC 1:2 SC/APC 1m 0.9mm splits the optical signal power evenly into all the output ports.

CBF High Qulity Pigtail with connectors SC/APC is dedicated for technologies FTTx.

FHO5000 series Optical Time Domain Reflectometer (OTDR) is an intelligent meter of a new generation for the detection of fiber communications systems.

Flat aerial fiber optic cable 12J ITU-T G.652D DROP in central tube and two support rods. Spans up to 50mb.

Measures optical power loss in fiber networks based on multimode and single-mode fibers.

FTTH round cable 2xG.657A2, 3.0mm diameter, white color

The 45-165 is a black Coax/UTP Cable Stripper for wire 5,0 - 8,0mm.

CFS-2 for stripping 250 micron buffer coating to expose 125 micron cladded fiber.

Self-supporting cable micro ADSS 1J G.657A2 is a universal cable dedicated for FTTH SPAN 80m.

Wall Box PSN4 6xSC duplex, key lock to complete the installation of fiber optic to install the adapter 6xSC DX or 6xLC Quad

Testing instrument specifically intended for FTTH and FTTP systems.

Splitter PLC 1:16 SC/APC 1m 0.9mm splits the optical signal power evenly into all the output ports.

The set of converters WDM worki on the waves TX1310 RX1550 at 10/100Mbps up to 20km.

Fibre Optic Cables A-DQ(ZN)B2Y, 9/125 12J 1,5kN PE single loose tube external duct cables with e-glass strength members and polyethylene (PE) jacket

Cabinet FTTH 144J 52/52/16 ST for wall mounting.

CBF 19 inch rack ODF with sliding front panel 1U 12x FC/ST

CBF Pigtail single-mode with connectors FC/PC 2m length

Converter TP-Link single-mode works on the wave length of 1310 with connector SC/PC duplex.

Organizer for managing the fiber optical cables (pigtails, patchcords).

Vertical Fiber Optic Closure up to 48J optical fibers, hermetic, 4 round holes.

Wall Box PSN2 to complete the installation of fiber optic to install the adapter 6xSC DX or 6xLC Quad

RCS-114 Designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets

Highly precise cleaver for glass fibers.

Splitter PLC 1x2 SC/APC BlackBox splits the optical signal power evenly into all the output ports.

CBF 19 inch rack ODF with sliding front panel 1U 12x SC duplex

The converter is equipped with a 4 ports copper RJ45 10/100Mbps and port SC/PC duplex SM 9/125